Repositionable and removable textile with a light grey adhesive, for wall cover and retail applications. This product leaves no damage or residue when removed, but a patch test is advised before full production. Please see full data sheet and application guide for further advice.- more info
Repositionable and removable textile - for wall cover and retail applications - this product leaves no damage or residue when removed.
A test patch should be produced prior to full install, please refer to application guide.- more info
UTACK Multi Surface Textile (Floors/Walls/Carpets) (indoor and outdoor)
A unique removable adhesive coated textile designed for indoor/outdoor wall and floor graphics. UTACK Multi Surface works perfectly on carpet, wood, tiles, and concrete surfaces. It is anti-slip to R12 and holds B1 and M1 fire certifications. This product has a lifespan of up to 3 months for interior floors and outdoor sidewalks (depending on footfall), 36-months for indoor walls, and up to 12-months for exterior walls. It can be digitally cut into any shape and is very stable. This product is compatible with solvent, UV, and Latex inks but with the latter requires 24 hours to cure. .- more info
A foam coated foil vinyl - with a heavy white textured top surface, indoor and outdoor use - for sports and expo events.
R10 anti slip and anti-bacterial top coat.
Up to 2 months indoor use and up to 2 weeks outdoor use, dependant on surface and footfall.- more info
AsphaltWalk is designed to be used for short to midterm applications on asphalt, cement, untreated stone, pavement and many more outdoor rough surfaces. AsphaltWalk is designed to be very robust against abrasion and other influences caused by normal use of the product, and to be easily be removed from such surfaces.
The material is PVC free, made from aluminium with a PU coating. Outdoor life use of 3-6 months.
UV, screen inks and Latex printable.- more info
Odour-free, PVC-free wall paper. This is a high performance flame retardant wall paper with an ultra-smooth finish. It is easy to install and pre-pasted, simply add water and apply, HP Latex approved.- more info
A crystal textured self-adhesive vinyl available with a permanent or removable clear adhesive. Ideal for indoor wall and floor graphics, it is rated up to 1 month in heavy footfall areas, and up to 3 months in light to medium traffic. The material is produced on an air escape release liner for easy application. It is slip rated to R10, DIN51130, BS7976 and fire rated to EN 13501. No lamination is needed, and if used for wall graphics or multiple panels, a 5 -10mm overlap is required.
.- more info
Clear textured material for the production of high impact floor graphics in wet and dry indoor areas.
Due to the material being clear, it allows the chosen image to pop, as areas could be left as clear material allowing images to standout and grab attention.
Clear walk has a waterproof adhesive, and anti bacterial textured face and is chemical and slip resistant, no lamination is required. Please refer to datasheets for further information.- more info
A very easy to apply satin polyester fabric, with a grey/black opaque reverse.
The perfect solution for fast graphics, wall murals, wall decor and expo systems and panels.
PVC FREE and with an M1 fire rating, this universal material ticks every box for easy and fast graphic and wall decoration.
UV, Latex and Solvent printable.
.- more info
SideWalk is PVC free, short to midterm outdoor floor graphic material.The product can be used on asphalt, cement, untreated stone, pavement and many more surfaces for up to 1-3 months, with the material being easily removed from those rough surfaces. SideWalk is rated to R11 slip standard and can be printed UV or Latex ink.- more info
A150-micron polymeric phthalate-free vinyl with a unique removable adhesive structure. Suitable for use on interior/exterior smooth surfaces, it’s easy to install and it can be re-applied several times without leaving residue or damage. It is compatible for use with Solvent, Latex and UV ink technology. Please note, a 48-hour patch test is recommended before full production to test sample surface and adhesion release. .- more info
