UTACK Multi Surface Textile (Floors/Walls/Carpets) (indoor and outdoor)

A unique removable adhesive coated textile designed for indoor/outdoor wall and floor graphics. UTACK Multi Surface works perfectly on carpet, wood, tiles, and concrete surfaces. It is anti-slip to R12 and holds B1 and M1 fire certifications. This product has a lifespan of up to 3 months for interior floors and outdoor sidewalks (depending on footfall), 36-months for indoor walls, and up to 12-months for exterior walls. It can be digitally cut into any shape and is very stable. This product is compatible with solvent, UV, and Latex inks but with the latter requires 24 hours to cure. .- more info

Asphalt Art Sport Walk (in and out )

A foam coated foil vinyl - with a heavy white textured top surface, indoor and outdoor use - for sports and expo events. R10 anti slip and anti-bacterial top coat. Up to 2 months indoor use and up to 2 weeks outdoor use, dependant on surface and footfall.- more info

Asphalt Art Asphalt Walk

AsphaltWalk is designed to be used for short to midterm applications on asphalt, cement, untreated stone, pavement and many more outdoor rough surfaces. AsphaltWalk is designed to be very robust against abrasion and other influences caused by normal use of the product, and to be easily be removed from such surfaces. The material is PVC free, made from aluminium with a PU coating. Outdoor life use of 3-6 months. UV, screen inks and Latex printable.- more info

Udeco Digital Floor Lino

Top selling UV print floor vinyl - anti slip - fire rated - supreme print quality and tough top coat - simply lay down for promo events, or use carpet tape, or floor adhesive for longer term installs - please test first.- more info

Neschen Print and Walk floor system - easydot adhesive

Easy dot print and walk - unique easy dot adhesive which is easy to apply and remove. Textured anti slip film for floor-graphics, no lamination required - R9 rated once printed with UV and Latex inks. En-13501 fire rated and printable with UV, Latex and UV Gel inks. HP Latex certified. .- more info

UPROTECT Sand Textured Laminate

Matt clear embossed PVC over laminating film with minimal glare and coated with a permanent acrylic adhesive suitable for over lamination of all ink types including UV inks. A rough texture with excellent anti scuff properties, commonly used for floor graphics and expo panels. BS476/R9 slip rated. Class 0 fire rated, 6 month indoor use.- more info

Ritrama RI-121/200 200mic embossed laminate (Floor talker system) - 01346

A 200 micron textured laminate with an R10 rating, dry and wet tested and suitable for indoor and outdoor floor graphics solutions. Internal graphics can be produced using Ritrama self adhesive vinyls such as 100 or 140, for external graphics Ri-jet High Grip vinyl 08198 should be used to adhere to SMOOTH outdoor surfaces ONLY. Apply between 15 c and 25 c surface temperatures. Floor graphics should be placed down on smooth, dry and clean surfaces, clean if needed with dry equipment such as brushes, cloths and heat, the area must be dry before application. Graphics should ideally be finished with rounded corners to prevent edge lift, avoid joints and grout lines, smooth solid surfaces only. Low heat can be used to finish the install and seal the graphic.- more info

Ritrama Hi-Grip Gloss White Polymeric, Extra Perm- 08198

High grip a high tack self adhesive vinyl for the production of indoor and external floor graphics onto smooth surfaces only. This material can also be used for decorative applications onto plastics or tanks for motocross, quad bikes and low energy surfaces. Use in conjunction with Ri-121/100 laminate for indoors or Ri-121/200 for indoor and outdoor floor graphics. For smooth surfaces only, please see full application instructions and data sheets before installation, this product also meets EN13501-1 Fire ratings.- more info

UTACK Multisurface Textured Vinyl

A crystal textured self-adhesive vinyl available with a permanent or removable clear adhesive. Ideal for indoor wall and floor graphics, it is rated up to 1 month in heavy footfall areas, and up to 3 months in light to medium traffic. The material is produced on an air escape release liner for easy application. It is slip rated to R10, DIN51130, BS7976 and fire rated to EN 13501. No lamination is needed, and if used for wall graphics or multiple panels, a 5 -10mm overlap is required. .- more info

Asphalt Art Asphalt Walk Smooth

Asphalt Walk Smooth can be used for short to mid term applications. Eco solvent, solvent and UV compatible. .- more info

Asphalt Art Fat Floor

Fat floor is a reverse print clear material, with an R10 anti slip textured top surface and B1 fire rating. Fat floor can be printed with UV inkjet using a white blockout layer for maximum colour impact once down on the floor. If you do not have the option of printing in white, you can apply "White DoubleStick" on the back of the FatFloor. With this option you have the white layer on the back of the FatFloor and the adhesive on the other side of the material for the application to the surface. The product can also be applied with a double-sided tape (CarpetTape). FatFloor is very resistant against wear and other influences, as the printing is done on the reverse side and therefore no colour wear can occur due to mechanical impact, if it is caused by the usual use of the product. Please see data sheet for application and disclaimer details. .- more info

Asphalt Art Clear Walk (Wet and Dry)

Clear textured material for the production of high impact floor graphics in wet and dry indoor areas. Due to the material being clear, it allows the chosen image to pop, as areas could be left as clear material allowing images to standout and grab attention. Clear walk has a waterproof adhesive, and anti bacterial textured face and is chemical and slip resistant, no lamination is required. Please refer to datasheets for further information.- more info