Repostionable and removable textile - for wall cover and retail applications - this product leaves no damage or residue when removed, however we do advise a test patch before full application.
Please see full data sheet and application guide for further advice.- more info
UTACK Multi Surface Textile (Floors/Walls/Carpets) (indoor and outdoor)
A unique adhesive coated thick fabric - for floor and wall graphics.
UTACK Multi surface can also be applied to carpet leaving no residue, outdoor application is also possible on smooth surfaces for up to 3 months.
UTACK Multi Surface is anti slip to R12 standard, plus benefits from B1 and M1 fire certifications. UTACK Multi Surface can be digitally cut into any shape. It is a very stable material so can either be overlapped or butt joined on walls and floors. Ink technologies - SV/UV - can be used for Latex inks, but must leave 24 hours to cure.- more info
Top selling UV print floor vinyl - anti slip - fire rated - supreme print quality and tough top coat - simply lay down for promo events, or use carpet tape, or floor adhesive for longer term installs - please test first.- more info
Saint gobain Solarguard armorcoat optical clear UV window film 4mil perm
Optical clear UV digital polyester window film, ideal for retail and commercial window graphics
2mil and 4mil available both with a solvent adhesive for wet application.
Solarguard also holds solar properties and energy saving capabilities, please refer to data sheet.- more info
A 200gsm wet strength white backed poster paper giving excellent image quality and outdoor durability
Printable wil UV, Latex and solvent inkjet systems
FSC (mix credit).- more info
A white digital print film, with a unique gel adhesion coating, easy to apply - (print, remove, re-apply) ideal for smooth surfaces such as glass, furniture and boards. The perfect easy install solution which leaves no residue or surface damage. Please refer to application guide.- more info
Unique Gel adhesion coating, easy to apply (print - remove - re-apply) the perfect solution for quick and high impact graphics, onto glass and any smooth surface (UV /latex/solvent).- more info
A satin linen texture providing a decorative surface for wall graphic applications, the polymeric film provides a stable base, a slight overlap is required when joining panels.
High quality extra Perm clear adhesive which supplies a solid bond.
Various finishes available.- more info
A 200 micron textured laminate with an R10 rating, dry and wet tested and suitable for indoor and outdoor floor graphics solutions.
Internal graphics can be produced using Ritrama self adhesive vinyls such as 100 or 140, for external graphics Ri-jet High Grip vinyl 08198 should be used to adhere to SMOOTH outdoor surfaces ONLY. Apply between 15 c and 25 c surface temperatures.
Floor graphics should be placed down on smooth, dry and clean surfaces, clean if needed with dry equipment such as brushes, cloths and heat, the area must be dry before application. Graphics should ideally be finished with rounded corners to prevent edge lift, avoid joints and grout lines, smooth solid surfaces only. Low heat can be used to finish the install and seal the graphic.- more info
Utack Superpower is a 100 micron white matt vinyl with a high tack permanent adhesive suitable for wall graphic and panel applications. The super strong grey adhesive is perfect for difficult and flat surfaces indoor or outdoors. This material is fire certified to Class 0 standard, life of approximately 3 years plus the shrinkage is less than 0.5mm!
Also available in a gloss finish, and FR Laminate available if required.- more info
Ritrama Hi-Grip Gloss White Polymeric, Extra Perm- 08198
High grip a high tack self adhesive vinyl for the production of indoor and external floor graphics onto smooth surfaces only. This material can also be used for decorative applications onto plastics or tanks for motocross, quad bikes and low energy surfaces. Use in conjunction with Ri-121/100 laminate for indoors or Ri-121/200 for indoor and outdoor floor graphics. For smooth surfaces only, please see full application instructions and data sheets before installation.- more info
A crystal textured self adhesive vinyl available with either a permanent or removable adhesive, in grey or clear adhesive versions. Ideal for indoor wall and floor graphics. Multisurface vinyl is rated up to 1 month in heavy foot traffic areas, and up to 3 months in light to medium traffic.
The material is produced on an air escape release liner for easy application.
Slip rated to R10, DIN51130, BS7976. Fire rated to EN 13501.
No lamination required - if used for wall graphics and multiple panels, a 5-10mm overlap is required.
.- more info