Mimaki CG-FXII Plus Series

World standard of multi cutting plotter

Mimaki

"CG-FXII Plus" is a new model standing as successor of "CG-FXII".
A new function ID Cut, useful for labor-saving process and efficient printing, has been added as "Plus" feature.

It is also possible to provide cutout characters through cutting a cutting sheet.
Seals, stickers, and labels can also be created through cutting along the contours of graphics printed by the inkjet printer.
"CG-FXII Plus Series" are easy-to-handle and reasonably priced products, ensuring your idea creation

New function

ID Cut function which is provided with our products makes labor-saving process and efficient printing & cutting operations possible.

A new function "ID Cut function" that enables continuous cutting operation to be performed automatically is adopted.
The "ID Cut function" is the function that automatically scans printed-out register marks with ID, then reads and cuts cut data. While any operators scanned register marks and specified cut data for each cutting job in the past, use of the "ID Cut" function is now made possible to perform unmanned and continuous cutting operations, and operators can proceed with another operation simultaneously when the machine is performing the cutting operation.

Main Features

High speed continuous crop mark detection

An optical sensor enables automatic consecutive detection of crop marks throughout the nested image which the Inkjet printer prints, in combination with the automatic adjustment function to obtain precise contour cutting.

Crop mark position data, which are received by command from standard attached plugin software "FineCut", enables quick movement between the crop marks. This function enables stress-reduced cutting.

By continuously detecting a maximum of 4 points, nested images in both X axis and Y axis can be cut aligning each image automatically.

Accurate media feeding ensures precise contour cutting over longer-length prints.

Necessary media length is fed in advance to reduce tension during cutting. This functions increases the precision of long-length print media cutting.

“HALF CUT”mechanism, a proprietary technology of Mimaki

With the original half cut function, the backing sheet can be cut leaving a little bit of half cut connecting points,which can be easily detached when necessary.Various media without backing sheets can be also cut.

Engineered Head Unit

Media is automatically cut by a standard sheet cutter.

Other functions

  • Selectable clamp pressure with high and low setting ensures accurate cutting of various media.
  • Selectable three jog speeds ensure proper and easy positioning of the head to the point.
  • Over-cut function makes the starting and ending points overlapped, which eliminates uncut portion of the media.
  • Media can be loaded from back or front.
  • Up to 6 roll media can be set at a time(1 set standard).
  • Plug-in cutting software for CorelDRAW and Illustrator is included.
  • A special adaptor to use commercially available pens and USB interface are included.
   CG-75FXII Plus  CG-130FXII Plus  CG-160FXII Plus
 Acceptable sheet width  90mm~1,040mm  (3.54"~40.9")  90mm~1,580mm  (3.54"~62.0")  90mm~1,880mm  (3.54"~74")
 Rolled media weight  18kg (40 lb) or less  22kg (49 lb) or less
 Roll outside diameter  φ200mm (7.87") or less
 Effective cutting area *1  760mm x 51m (29.9" x 167')  1,300mm x 51m (51.2" x 167')  1,600mm×51m (62.9"×167’)
 Maximum auto cutting width *2  870mm (34.2")  1,425mm (56.1")  1,720mm (67.7")
 Maximum cutting speed  100cm/s (39.3"/s)
 Maximum moving speed  140cm/s (55"/s) (In a 45° direction and in a pen-up state)
 Adjustable speed range *3  -10cm/s : 1cm step adjustment
 (0.39"-3.94"/s : 0.39" step adjustment)
 10-50cm/s : 5cm step adjustment
 (3.94"-19.68"/s : 2" step adjustment)
 50-100cm/s : 10cm step adjustment
 (19.68"-39.37" : 3.94" step adjustment)
 Mechanical resolution  5µm (0.0002")
 Command resolution  25μm, 10μm(MGL-IIc), 100μm, 50μm(MGL-Ic1)
 Repeatability  ±0.2mm (Excluding shrinkage / expansion caused by the film temperature)
 Accuracy assurance range   (Repeatability)  760mm x 10m (29.9" x 32.8')  1,300mm x 10m (51.2" x 32.8')  1,600mm x 10m (63.0" x 32.8')
 Max. pressure  500g
 Range of down pressure  Cutter  10~20g(2g step), 20~100g(5g step), 100~500g(10g step)
 Pouncing  10~20g(2g step), 20~100g(5g step), 100~500g(10g step)
 Pen  10~20g(2g step), 20~100g(5g step), 100~150g(10g step)
 Acceptable sheet *4  Vinyl up to 0.25mm(0.01")thickness,
 Fluorescent type vinyl Reflective sheet
 Acceptable sheet for pouncing *5  Paper thickness: 0.06~0.13mm (0.0024"~0.005")
 Applicable tools *6  Cutter, Water based ball-point pen,
 Oil based ball-point pen, Pouncing tool

 Certifications

 VCCI class A, FCC class A, ETL IEC 60950-1
 CE Marking (EMC, Low voltage, Machinery directive, and RoHS),
 CB, REACH, RCM, EAC
 Type of command  MGL-II c / I c1
 Interface  RS-232C, USB
 Receiver buffer size  30MB Standard (20MB when in sorting)
 Operational environment  Temperature: 5~35°C (41~95°F), 35%–75% RH (Non-condensing)
 Power requirement  AC100V~240V 1A 50/60Hz
 Power consumption  100W or less
 Dimensions (WxDxH)  1,285mm(50.5")x
 700mm(27.5")x
 1,217mm(47.9")
 1,825mm(71.8")x
 700mm(27.5")x
 1,217mm(47.9")
 2,125mm(83.6")x
 700mm(27.5")x
 1,217mm(47.9")
 Weight (with stands)  47kg (104 lb)  62kg (137 lb)  70kg (154 lb)

Share this page...